Starting The Program - Extron electronics CrossPoint 450 Plus Series Setup Manual

Starting the program

1.
Click
Switchers
The Comm Port Selection window appears.
2. Choose the comm (serial) port that is connected to the
switcher or
3.
Click
If you selected a serial port in step 2, the Matrix Switchers
Control Program is ready for operation.
4. If you selected IP [LAN] in step 2, the IP Connection window
appears.
a.
If necessary, enter the correct IP address in the field.
22 CrossPoint / MAV Matrix Switchers • Remote Control
>
Start Programs
>
MATRIX Switcher + Control Pgm
[ ].
IP LAN
For a comm port, check the baud rate displayed
NOTE:
in the comm port selection window. If you need to
change the baud rate, click the
click the desired baud rate.
.
OK
Examine the Matrix IP Address field, which displays the last
Matrix IP address entered.
NOTE: 192.168.254.254 is the factory-specified default
value for this field.
>
Extron Electronics
button and double-
Baud
>
Matrix
.