Setting Up The Printer - Intermec EasyCoder PF4i User Manual

6

Setting Up the Printer

This chapter describes the various parameters that are
used in the Setup Mode (see Chapter 7) or in the vari-
ous application programs to confi gure the printer for
the user's specifi c requirements. It covers the following
topics:
• Description
• Default setup
• Setup Parameters in regard of communication, feed
adjust, media, and print defi nes.
When measures are specifi ed as "dots", the actual
length in millimeters or inches depends on the print-
head density. Convert as follows:
8 dots/mm (203.2 dots/inch) printhead:
1 dots = 0.125 mm = 0.0049 inches (4.9 mils)
11.81 dots/mm (300 dots/inch) printhead:
1 dot = 0.085 mm = 0.0033 inches (3.3 mils)
Intermec EasyCoder PF4i Compact Industrial—User's Guide (Fingerprint) 45