HP -UX SNAplus2 Administration Manual page 379

Figure D-11 Client/Server configuration using Token Ring LAN DLC
Client
Primary HP-UX Server hp_pri
Token Ring Adapter
Card 0
D12
QLLC
If you are using QLLC links, both servers must have the same name
configured in the X.25 interface card configuration file. This name is also
used in the Interface Card field of the SNAplus2 configuration in the
QLLC Port configuration screen. For example, you might have the
following line in the /etc/x25/x25config_0 file on the primary
server:
name card0
which would correspond to the following entry in the QLLC Port
configuration screen:
Appendix D
Using SNAplus2 in a High Availability Environment
Using SNAplus2 with MC/ServiceGuard
Client Client
Backup HP-UX Server hp_back
Token Ring Adapter
Token Ring
3xxx
Communications
Controller
IBM
Host
Client
LAN
Card 0
379