Table of Contents
Advertisement
Configuring Passthrough Services
Configuring TN Server
If you want a TN3270 client to be able to use more than
one LU or LU pool, define multiple access records, each
with a different TCP/IP port number, so that you can
identify the different LUs or LU pools by specifying
different port numbers.
Display LU assigned
The name of the LU that the TN3270 client accesses
when it is active. The LU must be a dependent LU on
the local node. You can specify the name of an LU pool
rather than the name of a particular LU.
Printer LU assigned
The name of the default printer LU or LU pool for
clients that use this access record. This LU must be
defined as a dependent LU on the local node.
Allow access to specific LU
Specify this option to enable TN3270E and TN3287
clients to request a specific LU for a session. (This
option is not available to TN3270 clients.)
Additional Configuration
After performing the TN server access configuration, continue with the
following configuration tasks:
• Configure TN server association records as described in "Configuring
TN Server Association Records".
• To configure PU concentration, see "Configuring PU Concentration".
• To configure DLUR, see "Configuring DLUR".
• To configure user applications, see Chapter 8, "Configuring User
Applications."
Configuring TN Server Association Records
A TN server association record defines an association between a printer
LU and display LU, so that the TN3270E or TN3287 protocol can connect
the two. If the access record for the client permits selection of a specific
LU, this record enables a client to select a specific printer by specifying
the associated display LU.
To configure a TN server association record, use one of the following
methods:
228
Chapter 9
Advertisement
Table of Contents
