File Format For Snaptpinstall - HP -UX SNAplus2 Administration Manual

For UNIX
For Windows
End of Section
For UNIX
For Windows
End of Section

File Format for snaptpinstall

The file that supplies configuration information for an invokable TP is an
ASCII text file that can be modified using any standard text editor. Each
entry in the file has the following format:
[TPname]
full_pathname_of_executable_file
PATH =
command-line_arguments_separated_by_spaces
ARGUMENTS =
TYPE = QUEUED | QUEUED-BROADCAST | NON-QUEUED
nnn
TIMEOUT =
user_ID
USERID =
group_ID
GROUP =
LU_alias
LUALIAS =
environment_variable=value
ENV =
environment_variable=value
ENV =
SHOW = MAXIMIZED | MINIMIZED | HIDDEN | NORMAL |
NOACTIVATE | MINNOACTIVATE
SECURITY_TYPE = APPLICATION | SERVICE
SERVICE_NAME =
The parameters are as follows. For an operator-started TP, the only
parameters used are the TP name, the TP type, and the timeout value;
the other parameters apply only to automatically started TPs.
On HP-UX machines, SNAplus2 returns an error message if you enter an
invalid parameter.
On Window machines, SNAplus2 ignores invalid parameters.
TPname
The name of the TP (1–64 characters, with no
embedded space characters). The TP name specified on
the Receive_Allocate, or on the incoming Allocate
request, is matched against this name. If the TP is an
automatically started TP, it must specify this TP name
Appendix C
Configuring an Invokable TP Using snaptpinstall
.
.
.
name_of_installed_service
File Format for snaptpinstall
345