Table of Contents
Advertisement
This parameter is optional. If it is not specified, the
Win16 client uses the global domain settings to
determine whether exception messages are recorded.
(The initial default is that exception messages are
recorded.)
audit_logging_enabled
Set this parameter to one of the following values:
YES
Record audit messages.
NO
Do not record audit messages.
This parameter is optional. If it is not specified, the
Win16 client uses the global domain settings to
determine whether audit messages are recorded. (The
initial default is that audit messages are recorded.)
log_directory
The full path of the directory where log files are stored
on this client. All the log files and backup log files
(specified in the following parameters) are stored in
this directory.
This parameter is optional. If it is not specified, the
files are stored in the Windows installation directory
(typically c:\windows).
error_file
Name of the file to which error messages are written.
This parameter is optional. If it is not specified, the
default is sna.err.
To log error and audit messages to a single file, specify
the same file name for both this parameter and the
audit_file parameter.
backup_error_file
Name of the backup error log file. When the error log
file reaches the size specified in error_file_wrap_size,
SNAplus2 copies its contents to the backup file
(overwriting any existing file), then clears the error log
file.
This parameter is optional. If it is not specified, the
default is bak.err.
Chapter 11
Managing SNAplus2 Clients
Managing Win16 Clients
285
Advertisement
Table of Contents
