Table of Contents
Advertisement
A locally displayable alias for the partner LU. You do
not have to specify an LU alias if there is no local
application that refers to the partner LU using an LU
alias.
This field applies when you define partner LU on a
specific remote node or when you define a partner LU
alias.
Uninterpreted Name
The uninterpreted name used by dependent local LUs
when requesting the host to start an LU-LU session
between the partner LU and the local LU. This name
enables the partner LU name configured locally (and
used by applications) to differ from the partner LU
name configured on the host.
The default uninterpreted name is the second part of
the partner LU name. This is correct in most cases. If
in doubt, consult your SNA network planner.
This field applies when you define partner LU on a
specific remote node or when you define a partner LU
alias.
Supports parallel sessions
Whether the partner LU can support more than one
session at a time. In most cases, the partner LU
supports many sessions at one time, but some LEN
nodes do not support parallel sessions.
This field applies when you define partner LU on a
specific remote node or when you define a partner LU
alias.
Location
The fully qualified CP name of the node on which the
partner LU resides, or of a node that can provide access
to the partner LU. If you supply the name of a remote
node that has not yet been defined, you need to define it
if you cannot discover the node dynamically.
This field applies only if you define a partner LU on a
specific remote node.
Chapter 7
Configuring APPC Communication
Defining Partner LUs
185
Advertisement
Table of Contents
