Table of Contents
Advertisement
Managing SNAplus2 Clients
Managing Win32 Clients
This parameter is optional. If it is not specified, the
Win32 client uses the global domain settings to
determine whether audit messages are recorded. (The
initial default is that audit messages are recorded.)
log_directory
The Registry data type of this value is REG_SZ.
The full path of the directory where log files are stored
on this client. All the log files and backup log files
(specified in the following parameters) are stored in
this directory.
This parameter is optional. If it is not specified, the
files are stored in the Windows installation directory.
error_file
The Registry data type of this value is REG_SZ.
Name of the file to which error messages are written.
This parameter is optional. If it is not specified, the
default is sna.err.
To log error and audit messages to a single file, specify
the same file name for both this parameter and the
audit_file parameter.
backup_error_file
The Registry data type of this value is REG_SZ.
Name of the backup error log file. When the error log
file reaches the size specified in error_file_wrap_size,
SNAplus2 copies its contents to the backup file
(overwriting any existing file), then clears the error log
file.
This parameter is optional. If it is not specified, the
default is bak.err.
To log error and audit messages to a single file, specify
the same file name for both this parameter and the
backup_audit_file parameter.
error_file_wrap_size
The Registry data type of this value is REG_DWORD.
The maximum size of the log file specified by
error_file. When a message written to the file causes
the file size to exceed this limit, SNAplus2 copies the
current contents of the log file to the backup log file,
then clears the log file. This means that the maximum
264
Chapter 11
Advertisement
Table of Contents
