HP -UX SNAplus2 Administration Manual page 309

Motif Field
Downstream PU
name
Upstream DLUS
name
Contact information
Poll address
Line encoding
Duplex Setting
Dial string
Appendix A
Valid Entry/Notes
1–8 type A EBCDIC characters
NETNAME.LUNAME (each 1–8 type A
EBCDIC characters)
For switched incoming ports, only
configured on the port.
2 hexadecimal digits:
• C1 for point-to-point
• 0xFF for primary switched outgoing
(destination address unknown)
• Unique addresses for primary to
multi-drop
On a VTAM host, the poll address is
configured as the ADDR= parameter in
the VTAM PU definition.
On an AS/400 system, the poll address is
the STNADR parameter of the Line
Description.
NRZ or NRZI (only for switched outgoing
calls)
On a VTAM host, this is the NRZI= setting
in the LINE/GROUP definition.
Only for switched outgoing calls:
• Half Duplex
• Full Duplex
Configuration Planning Worksheets
Connectivity Worksheets
Your
Implementation
Value
Only for switched
outgoing calls
309