HP -UX SNAplus2 Administration Manual page 274

Managing SNAplus2 Clients
Managing Win32 Clients
The TP name of the application. This name is used in
log and trace files to identify the application. For an
invoked application (one that issues
Accept_Conversation), it is also used to match the TP
name on an incoming Allocate request with the correct
application; the invoked application can also use the
Specify_Local_TP_Name call to specify additional
names to be matched with incoming Allocate requests.
This parameter is optional. If it is not specified, the
default is CPIC_DEFAULT_TPNAME.
CSV_data
The CSV_data subkey specifies options for applications that use the CSV
interface. It applies only to applications that use the CONVERT verb to
perform character conversion with a user-defined conversion table (Table
G). For more information about the CONVERT verb, refer to HP-UX
SNAplus2 CSV Programmers Guide.
If no applications on the client use this function, you do not need to
include this section.
The only option in this section is as follows:
CSVTBLG
The Registry data type of this value is REG_SZ.
The full path name of the file containing the
user-defined Table G conversion table. This parameter
is required if CSV applications need to perform Table G
character conversion (there is no default); otherwise it
is optional.
274 Chapter 11