Table of Contents
Advertisement
Motif Field
Remote node
Remote node type
Dependent LU traffic
Remote node role
Local node ID
Remote node ID
Downstream PU
name
Upstream DLUS
name
Appendix A
Valid Entry/Notes
NETNAME.CPNAME (each 1–8 type
A EBCDIC characters; optional)
If the remote system is a VTAM host,
you can find the network name (the
first eight characters of the fully
qualified name) in the NETID
parameter of the VTAM Start
command. The last eight characters
are in the SSCPNAME parameter of
the VTAM Start command.
Discover
End or LEN node
Network node
Host
Downstream (DLUR)
8 hexadecimal digits (defaults to node
name)
In a VTAM configuration, the first
three digits should match the IDBLK
parameter in the PU definition, and
the last five should match the IDNUM
parameter.
On an AS/400 system, the node ID is
configured in the EXCHID parameter.
8 hexadecimal digits (optional)
1–8 type A EBCDIC characters
NETNAME.LUNAME (each 1–8 type
A EBCDIC characters)
Configuration Planning Worksheets
Connectivity Worksheets
Your
Implementation
Value
311
Advertisement
Table of Contents
