Table of Contents
Advertisement
Configuring Passthrough Services
Configuring TN Server
Configuring TN Server Access Records
TN server access records indicate which TN3270 clients can access the
TN server and which LUs they should use. Each access record identifies
a TN3270 client that is permitted to access the TN server, the TCP/IP
port that the client connects to, and the LU or LU pool that the client
uses. You can also define default records that enable access by any
TN3270 client.
If you want to permit any TN3270 client to use the TN server and you
want all TN3270 clients to use the same LUs or LU pools, you can define
a default record.
TN3270 clients can use the TN server only when the node, port, and link
station are active.
To configure a TN server access record, use one of the following methods:
Motif administration program
Select TN server from the Services menu on the
Node window, and TN server from the submenu. On
the resulting window, select the TN Server Client
Access Permissions pane and choose New.
Command-line administration program
Issue the following command:
define_tn3270_access
TN Server Access Record Configuration Parameters
The following parameters are required for TN server access record
configuration:
TN3270 client address
The address that identifies the TN3270 client to which
the access record applies:
Default record
Permit access by any TN3270 client.
TCP/IP name or alias
Permit access by a named TN3270 client. If you know
the TCP/IP name of the client, select this option and
enter the name. On many computers, you can find out
the computer's TCP/IP name using the hostname
command.
TCP/IP address
226
Chapter 9
Advertisement
Table of Contents
