HP -UX SNAplus2 Administration Manual page 350

For Windows
Configuring an Invokable TP Using snaptpinstall
File Format for snaptpinstall
If the LU alias is specified for an automatically started
TP, the TP must use the extended form of the
RECEIVE_ALLOCATE verb and specify this LU alias
as a parameter to the verb. This enables SNAplus2 to
route the incoming Attach to the correct TP. For more
information about the different forms of
RECEIVE_ALLOCATE, refer to HP-UX SNAplus2
APPC Programmers Guide. If you need to permit the
TP to determine the correct LU alias at run-time
rather than building it into the application, you can do
this by setting an environment variable to contain the
appropriate LU alias (using the ENV parameter), and
designing the application to read this environment
variable in order to determine how to issue
RECEIVE_ALLOCATE.
This line is optional; if it is not included, the default is
to accept incoming Attaches from any local LU.
ENV
Specify any environment variables required by the TP.
Each variable is specified in the form
environment_variable=value on a separate ENV line.
Up to 64 ENV lines can be included; the variables are
set in the same order as they appear here.
The string environment_variable=value must not
contain space or tab characters before or after the =
character.
SHOW
Specify how the application should be displayed when
it is started. This parameter is passed to the
application, and not processed by SNAplus2; it is the
application's responsibility to interpret it and act on it.
You can enter any of the following values:
MAXIMIZED
The application is maximized.
MINIMIZED
The application is minimized.
HIDDEN
The application does not appear on the screen.
NORMAL
350 Appendix C