HP -UX SNAplus2 Administration Manual page 362

Table D-1
System Name
SNAplus2 Node
SNAplus2 Port
SNAplus2 LS
SNAplus2 Local LU aliases
NOTE
Using SNAplus2 in a High Availability Environment
SNAplus2 High Availability Features
Component
The above example will be used throughout this appendix to explain
many different aspects of high availability systems.
In this example, nine LUs are used by APPC production applications
that run on the client systems. These LUs are configured to use an
SNAplus2 LS called HALS. This LS is configured to use the SNAplus2
LAN port HAPORT and can be run under the SNAplus2 node HANODE.
Normally, this configuration is run on the primary server hp_pri as
shown below. In addition, five LUs are used by APPC transaction
programs for development purposes. These LUs are configured to use an
SNAplus2 LS called DEVLS. This LS is configured to use the SNAplus2
LAN port DEVPORT, and can be run under the SNAplus2 node DEVNODE.
Normally, this configuration is run on the backup server hp_back as
shown below.
362
Primary Server
hp_pri
HANODE
HAPORT
HALS
HALU01...HALU09
Backup Server
hp_back
DEVNODE
DEVPORT
DEVLS
DEVLU01...DEVLU05
Appendix D