HP -UX SNAplus2 Administration Manual page 292

Managing SNAplus2 Clients
Managing Win16 Clients
To trace 3270 messages, set this parameter to YES;
otherwise, set it to NO. This parameter is optional. If it
is not specified, the default is NO.
[CS_tracing]
The [CS_tracing] section of the file specifies options for client/server
tracing (tracing on messages between the client and SNAplus2 servers).
For more information about tracing, refer to HP-UX SNAplus2
Diagnostics Guide. The tracing options are specified as follows:
file1
The full path name of the trace file, or of the first trace
file if tracing is to two files (see the description of the
file2 parameter).
This parameter is required if you want to enable
client/server tracing; you also need to set the
trace_flags parameter.
file2
The full path name of the second trace file. This
parameter is optional; to indicate that tracing is to one
file instead of two files, do not include this line.
If both file1 and file2 are specified, tracing is to two
files. When the first file reaches the size specified by
the flip_size parameter, the second file is cleared, and
tracing continues to the second file. When this file then
reaches the size specified by flip_size, the first file is
cleared, and tracing continues to the first file. This
ensures that tracing can continue for long periods
without using excessive disk space; the maximum
space required is approximately twice the value of the
flip_size parameter.
flip_size
The maximum size of the trace file. If two file names
are specified, tracing switches between the two files
when the current file reaches this size. If only one file
name is specified, this parameter is ignored; the file
size is not limited.
This parameter is optional. If it is not specified, the
default is 100000 (bytes).
admin_msg
292 Chapter 11