Table of Contents
Advertisement
used to create a key, which is exchanged when the
session is established. This password is not related to
HP-UX login passwords on either the local or the
remote node.
Additional Configuration
After performing the session security configuration, continue with the
following configuration tasks:
• To configure conversation security, see "Configuring Conversation
Security".
• To configure 5250 communication, see Chapter 8, "Configuring User
Applications."
Configuring Conversation Security
Conversation security is used to validate incoming conversations. Each
definition consists of a user ID and a password. The user IDs and
passwords are not related to HP-UX logon user IDs and passwords.
To configure conversation security, use one of the following methods:
Motif administration program
Select APPC, Security, and Conversation-level
security from the Services menu on the Node
window.
Command-line administration program
Issue the following command:
define_userid_password
Conversation Security Configuration Parameters
The following parameters are required for conversation security
configuration:
User ID
The user ID to be accepted in an incoming conversation
from a remote node. The user ID can be up to 10
characters long. This user ID is not related to HP-UX
login user IDs on either the local or the remote node.
Password
Chapter 7
Configuring APPC Communication
Configuring APPC Security
205
Advertisement
Table of Contents
