Figure 6 - Advanced Settings
•
Setting column: Displays the type of setting
•
Default column: Displays the default setting value
•
Current column: Displays the current setting value
•
Apply button: Applies the changed values.
Change the Current value by clicking the field to activate the control, enter the new value,
and click Apply or OK to apply the change. The change to the firmware value is
confirmed by one beep from the printer.
•
Restore Defaults button: Restores all factory default values. To restore the factory
default values, click the Restore Defaults button and click Yes on the Settings
confirmation screen.
June 2013
© 2013 HID Global Corporation /ASSA ABLOY AB. All rights reserved
C50 Card Printer User Guide, Part Number PLT-01277, Rev 1.1
Page 24