Figure 7 - Settings (Factory Defaults) Confirmation - HID FARGO C50 User Manual

C50 Card Printer User Guide, Part Number PLT-01277, Rev 1.1
Figure 7 – Settings (Factory Defaults) Confirmation
4.7.1 Settings and Troubleshooting
The Advanced Settings tab includes the Default and Current values for the following settings.
The following table describes the use of each advanced setting and possible troubleshooting
solutions.
Setting Description
Head Printhead resistance is set to
Resistance an incorrect value.
Print Left of Adjusts the vertical position of
Form the printed image on the card;
so it appears centered.
Page 25
© 2013 HID Global Corporation /ASSA ABLOY AB. All rights reserved.
Troubleshooting
Locate the actual resistance value on the printhead, for
example, R=XXX.
Reserved.
June 2013