Set Language - HID FARGO C50 User Manual

4.4.2 Event Monitoring
Event Monitoring selects events that result in notification or displays prompt for the Operator.
The default setting is to monitor four conditions:
•
Low Ribbon – Notifies the Operator that the amount of ribbon remaining for use in the
cartridge is diminishing. A Do not show this message again. check box allows the
user to suppress the message during the current printing session. The check box default
condition is unchecked.
•
Clean Printer – Notifies the Operator the printer requires cleaning and provides a Clean
button to start the cleaning process.
•
Error Status – Notifies the Operator that an error status exists.
•
Password Prompt – Requires the Operator to enter a security password before the
printer driver accepts a print job.
4.4.3

Set Language

Set Language enables the selection of the language used for printer driver messages. The
default printer language is English.
The printer is capable of other languages with the use of language packs. Change the printer
language by using the ToolBox (sending the proper language pack to the printer). Only the
languages available within the printer firmware (as downloaded through the language packs)
are choices in the dropdown menu. Contact Technical Support (support.hidglobal.com) to
obtain printer language packs.
June 2013
© 2013 HID Global Corporation /ASSA ABLOY AB. All rights reserved
C50 Card Printer User Guide, Part Number PLT-01277, Rev 1.1
Page 20