Table of Contents
Advertisement
Figure 97
Calibrate decision box
Figure 98
PAGE TRACKING buttons
Figure 99
LCD Timer page
66
Mini-Touch Panel Program Reference
Calibrate
Press the CALIBRATE button to open the decision box ( Figure 97) and reset the
vertical and horizontal touch points on the screen.
THIS FUNCTION IS
YES
****FACTORY SET*****
PRESS NO TO EXIT
• YES
Starts the calibration test. Carefully press each crosshair using your
finger or a dull pointer. When the calibration is complete, press the screen to
return to the Protected Setup page. Perform the calibration test when the
touch points and buttons are misaligned.
• NO
Cancels the calibration test.
Page tracking
Press the PAGE TRACKING button to set the page tracking option. When the page
tracking button is enabled, the mini-touch panel sends active page data back to the
AXCESS Control System, RS-232 port, or both depending on which option you select
in the Adjust Serial Settings page. The data can be used to control pages in another
mini-touch panel. Page tracking is on when the button background is black with
white text (Figure 98), and off when the background is white with black text.
PAGE
PAGE
TRACKING
TRACKING
On
Off
LCD timer message
Press the LCD TIMER MESSAGE button to open the page shown in Figure 99.
TEXT MESSAGE
CLOCK DISPLAY
DRAWING
NO
AMX LOGO
Black/White LCD Mini-Touch Panels
Advertisement
Table of Contents
