AMX LCD Mini-Touch Panels Instruction Manual page 16

Figure 7
AXU-MLC (/PB) and BB-MTP
cutout dimensions
Note
The BB-MTP can also be
mounted to wood or metal
studs using the pre-drilled stud
mounting holes.
8 Installing the Mini-Touch Panel
.170
[4.3 MM]
.35
[8.9 MM]
.52
[13.2 MM]
3.22
[81.8 MM]
.187 [4.7 MM] DIA
4 HOLES
2.94
[74.7 MM]
STUD MOUNTING OPTION:
TWO .170 [4.3 MM] DIA HOLES PROVIDED ON
ALL SIDES OF BACK BOX FOR STUD MOUNTING.
Lay the AXU-MLC (/PB) facedown onto a soft cloth and remove the four screws
3.
from the low profile back box. Remove the back box and discard.
Place the BB-MTP into the cutout and mark the threaded insert positions as
4.
shown in Figure 7.
Remove the BB-MTP and drill eight holes as shown in Figure 6. Then, place #6-
5.
32 threaded inserts into the four holes marked 'B' in the cutout dimensions
illustration.
Disconnect the AXlink connector from the AMX control system that supplies
6.
power and data to the AXU-MLC (/PB). Then, disconnect the optional RS-232
connector from the external RS-232 device connected to the AXU-MLC (/PB).
Remove one or more knockouts to accommodate the wiring as required.
7.
8.187
[208.0 MM]
(FRAME)
7.80
[198.1 MM]
7.46
[189.5 MM]
7.10
[180.3 MM]
.125 [3.2 MM] MAX
RADIUS IN CORNERS
.125
[3.2 MM]
1.70
[43.2 MM]
4.25
[108.0 MM]
4.50
[114.3 MM]
(FRAME)
1.70
[43.2 MM]
CUTOUT
Black/White LCD Mini-Touch Panels