Designing A Mini-Touch Panel Page; Overview; Activate The Editor Bar - AMX LCD Mini-Touch Panels Instruction Manual

Figure 37
Main page
Black/White LCD Mini-Touch Panels

Designing a Mini-Touch Panel Page

Overview

This section contains step-by-step instructions to create a mini-touch panel page and
a button, joy stick, and bargraph. Once you understand the basic operations, go
through the Mini-Touch Panel Program Reference section to learn about all the
operations you can use to design mini-touch panel pages.

Activate the Editor Bar

Before you can design a mini-touch panel page, you need to activate the editor bar.
When you power up the panel, the first page you should see is the Main page
(Figure 37). If you have a pre-programmed panel, you may not see the Main page.
Refer to the Editor bar and Go to information in the Mini-Touch Panel Program
Reference section to access the Main page.
MAIN
PAGE
Press SETUP in the Main page to open the Setup page ( Figure 38).
1.
SETUP
Designing a Mini-Touch Panel Page 29