AMX LCD Mini-Touch Panels Instruction Manual page 14

Figure 5
AXU-MLC and low profile back
box cutout dimensions
6 Installing the Mini-Touch Panel
Make a cutout in the surface according to the dimensions shown in Figure 5 for
1.
a low-profile back box.
Insert a flat head screwdriver into the release slot on the AXU-MLC (/PB)' s
2.
bezel and remove the engraved overlay.
Place the AXU-MLC (/PB) into the cutout and mark the screw insert positions as
3.
shown in Figure 4.
Remove the AXU-MLC (/PB) and drill four #6-32 insert holes. Then, place a
4.
threaded insert into each hole.
Attach the data and power wiring to the AXU-MLC (/PB). Refer to Wiring the
5.
Mini-Touch Panels for wiring diagrams and pinout descriptions.
Black/White LCD Mini-Touch Panels