AMX LCD Mini-Touch Panels Instruction Manual page 103

Figure 145
Icon options
Black/White LCD Mini-Touch Panels
position and level code 8 as the Y (vertical) position. Refer to the AXCESS
Programming Guide for more information on level codes.
• FUNCTION
Opens the Icon options shown in Figure 145.
JOYSTICK NON CENTER JOYSTICK
CROSSHAIR NON CENTER CROSSHAIR
Choose one of the icon options.
JOY STICK Sets the icon to a four-quadrant joy stick button with a control
stick located in the center. When you move the control stick, the mini-touch
panel sends feedback (data) to the control system and to the external device to
perform a pre-programmed operation. When you remove your finger from
the screen, the control stick returns to the center of the icon and the external
device returns to its default position.
CROSSHAIR Sets the icon to a four-quadrant crosshair button with a
control stick located in the center. When you move the control stick, the mini-
touch panel sends feedback (data ) to the control system and to the external
device to perform a pre-programmed operation. When you remove your
finger from the screen, the control stick returns to the center of the icon and
the external device returns to its default position.
NON CENTER JOY STICK
with a control stick. When you move the control stick, the mini-touch panel
sends feedback (data) to the control system and to the external device to
perform a pre-programmed operation. When you remove your finger from
the screen, the control stick and external device stay in that position.
Sets the icon to a four-quadrant joy stick button
Mini-Touch Panel Program Reference 95