Set Time And Date - AMX LCD Mini-Touch Panels Instruction Manual

Figure 82
Set time and date page
Black/White LCD Mini-Touch Panels
• SLEEP TIME
Press the up and down buttons to set the sleep time. The
minimum sleep time is 0 (off) and maximum is 150 minutes. When the mini-
touch panel goes to sleep, all communication and battery discharge stops. If
the sleep time is set to 5, the panel goes into sleep mode if there is no activity
for 5 minutes. The mini-touch panel will wake up when you touch the screen
for more than .5 seconds.
• SERVER VERSION vX.XX
the AXR-WAVES Server that is communicating with the mini-touch panel.
• DEVICE RANGE XXX-XXX
communicate with the AXR-WAVES Server. Each AXR-WAVES Server uses a
group ID number and device range to communicate with mini-touch panels
(16 maximum). Refer to the AXR-WAVES Server and Wireless Power Packs
instruction manual for more information about device and group ID settings.
• NETWORK EFFICIENCY XX%
directional RF transmissions between all the mini-touch panels and AXR-
WAVES Server. The percentage of efficiency (0-100%) is calculated by the
number of retries required to perform a panel operation.
• SERVER DEVICES
touch panels communicating with the AXR-WAVES Server.

Set time and date

Press the SET TIME AND DATE button to open the page shown in Figure 82.
SET TIME IN 24 HOUR FORMAT
YEAR MONTH
97 1
UP DN UP DN
HOUR MIN
5 5
UP DN UP DN
DISPLAY
MONTH/DAY
Shows the ROM firmware version installed in
Shows the AXlink device numbers that can
Shows the communication status of bi-
Shows the AXlink device number of the TiltScreen mini-
EXIT
DAY
10
UP DN
DISPLAY
12:00
Mini-Touch Panel Program Reference 55