AMX LCD Mini-Touch Panels Instruction Manual page 18

Figure 9
AXU-MLC (/PB) and BB-MTP
cutout dimensions
10 Installing the Mini-Touch Panel
Cut the surface according to the cutout dimensions shown in Figure 9.
1.
Insert a flat head screwdriver into the release slot on the AXU-MLC (/PB)' s
2.
bezel and remove the engraved overlay.
Lay the AXU-MLC (/PB) facedown onto a soft cloth and remove the four screws
3.
from the low profile back box. Remove the back box and discard.
Place the BB-MTP into the cutout and mark the threaded insert positions as
4.
shown in Figure 9.
Black/White LCD Mini-Touch Panels