Input Locking - Barco R9004460 Owner's Manual

Which blanking adjustments are available ?
• top blanking
• bottom blanking
• left blanking
• right blanking
Image 6-19
Adjusting the blanking
1. Push the cursor key ↑ or ↓ to highlight Blanking. (menu 6-76)
2. Press ENTER to display the blanking menu. (menu 6-77)
3. Push the cursor key ↑ or ↓ to highlight the desired blanking adjustment.
4. Press ENTER to start up the chosen blanking.
5. Use the cursor keys to adjust the blanking.
LAYOUT ADJUSTMENT
LOAD
RENAME
DELETE
ADD WINDOW
REMOVE WINDOW
EDIT WINDOW
KEYSTONE
BLANKING

INPUT LOCKING

Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-76
6.6.10 Input locking
What can be done ?
The output signal can be locked on an internal generated sync signal or on the sync signal of one of the input sources. Locking the
output signal on an input signal can be required if motion artifacts occurs in that window or if frame delay for that input has to be set
to zero.
How to setup ?
1. Push the cursor key ↑ or ↓ to highlight Input Locking. (menu 6-78)
The Input locking menu will be displayed. (menu 6-79)
2. Push the cursor key ↑ or ↓ to highlight the desired locking mode.
R59770014 XLM HD30 07/07/2006
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-77
6. Adjustment Mode
79