Switching to Standby. When the projector is running and you want to go to standby, press the standby key
for 2 seconds. Do not press any longer on the standby key otherwise the projector will restart.
When switching to standby, it takes 15 seconds before the projector can be switched on again.
4.6
Switching off
How to switch off the projector?
1. Press first Standby.
2. Let cool down the projector until the fans stop blowing, at least 15 min.
3. Switch off the projector with the power switch.
4.7
Using the RCU
Pointing to a reflective screen.
1. Point the front of the RCU to the reflective screen surface. (image 4-3)
Remote Control (A)
Image 4-3
Pointing RCU to the screen
When using the remote control, make sure you are within the effective operating distance.
The operating distance may be up to 15 m (50ft).
R59770014 XLM HD30 07/07/2006
IR sensor (C)
Screen (B)
4. Getting Started
41