Date And Time Setup - Barco R9004460 Owner's Manual

5. Set DHCP on or off (contact your network responsible for the correct setting in your environment).
DHCP on
DHCP off
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
BROADCAST MODE [OFF]
DIAGNOSIS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-14
Entering the necessary addresses.
1. Select the IP address with the cursor keys. (menu 8-17)
2. Press ENTER to edit.
3. Enter or reprogram the address with the numeric keys (contact your network responsible for the correct address).
An address contains 4 octets with a maximum value of 255, separated by a bullet.
4. Repeat the above steps for the subnet mask and the default gateway.
5. Select APPLY and press ENTER to install the entered addresses.
If a wrong value for an octet is entered, the value will jump automatically to 255.
NETWORK CONFIGURATION
DHCP [ON]
IP ADDRESS 158.150.160.200
SUBNET MASK 158.150.160.201
DEFAULT GATEWAY
158.150.300.300
MAC ADDRESS 01:01:02:DB:FF:89
APPLY
Select with ↑ or ↓
then <ENTER>
Reprogram with ↑ or ↓, ← or →
or numeric keys
'APPLY' to confirm
<EXIT> to return
Menu 8-17
8.5

Date and time setup

Why?
As the processor logged information in a file, it is very interesting to know when exactly this information was logged.
How to set up ?
1. Push the cursor key ↑ or ↓ to highlight Date and Time. (menu 8-18)
2. Press ENTER to select.
The Date and Time menu will be displayed. (menu 8-19)
The first digit will be highlighted.
3. Use the ↑ or ↓ key to change the value. Use the ← or → key to select the next digit.
R59770014 XLM HD30 07/07/2006
DHCP server assigned an IP address to the client (network projector).
the client has to fill out the IP address, the subnet mask and the default gateway.
COMMUNICATION
BAUDRATE [115200]
INTERFACE STANDARD[RS232]
RS422 TERMINATION [OFF]
NETWORK
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-15
NETWORK CONFIGURATION
DHCP [ON]
IP ADDRESS 158.150.160.200
SUBNET MASK 158.150.160.201
DEFAULT GATEWAY
158.150.300.300
MAC ADDRESS 01:01:02:DB:FF:89
APPLY
Select with ↑ or ↓
then <ENTER>
Reprogram with ↑ or ↓, ← or →
or numeric keys
'APPLY' to confirm
<EXIT> to return
Menu 8-16
8. Service
103