Configuration; Lens; Lens Adjustment - Barco R9004460 Owner's Manual

7. Installation
Possible results
Source
Video
S-Video
RGB analog
Component Video
DVI
SDI
HD-SDI
7.3

Configuration

What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation configurations are possible:
• front/table
• front/ceiling
• rear/table
• rear/table
Set up the Correct Configuration
1. Push the cursor key ↑ or ↓ to highlight Configuration. (menu 7-4)
2. Press ENTER to select.
The configuration menu will be displayed. (menu 7-5)
INSTALLATION
INPUT SLOTS
CONFIGURATION

LENS

TILT
INTERNAL PATTERNS
BUTTONS
MACROS
OSD
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-4
For more information, see Installation Guidelines .
7.4 Lens
7.4.1

Lens adjustment

What can be done ?
All lens adjustments are motorized and can be adjusted with the RCU.
88
Indication
d320 cvbs/S-vid [cvbs]
d320 cvbs/S-vid [s-vid]
d320 an uxga
d320 yuv/rgsb [rgsb]
d320 yuv/rgsb [yuv]
d320 dvi
d320 sdi
d320 hdsdi
CONFIGURATION
FRONT/TABLE
FRONT/CEILING
REAR/TABLE
REAR/CEILING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-5
R59770014 XLM HD30 07/07/2006