8. Service
4. Press ENTER to confirm the new values.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
BROADCAST MODE [OFF]
DIAGNOSIS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-18
8.6
Lamp
How to display the lamp information
1. Push the cursor key ↑ or ↓ to highlight Lamp. (menu 8-20)
2. Press ENTER to select.
The lamp overview menu will be displayed. (menu 8-21)
This menu indicates :
-
The serial number
-
The article number of the lamp
-
The run time
-
The remaining run time for a safe operation
-
The number of strikes since the first start up
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
BROADCAST MODE [OFF]
DIAGNOSIS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-20
8.7
Dimming-CLO
The CLO function in this menu are only active when a valid CLO key is entered.
How to set the power mode ?
1. Push the cursor key ↑ or ↓ to highlight Dimming/CLO. (menu 8-22)
2. Press ENTER to select.
The Dimming/CLO menu will be displayed. (image 8-1)
3. Push the cursor key ↑ or ↓ to highlight Mode.
4. Press ENTER to toggle between [Economic], [Normal] or [CLO]
104
DATE AND TIME
2001-01-29 07:12
Select with ← or →
Reprogram with ↑, ↓
<ENTER> to confirm
<EXIT> to return
Menu 8-19
LAMP
SERIAL NUMBER: 1012000
ARTICLE NUMBER: R9806510
RUN TIME: 11h
REMAINING RUNTIME: 489h
NUMBER OF STRIKES: 55
<EXIT> to return
Menu 8-21
R59770014 XLM HD30 07/07/2006