Projector Configuration - Barco R9004460 Owner's Manual

2.3

Projector configuration

Which configuration can be used ?
The projector can be installed to project images in four different configurations:
• Front/table
• Rear/table
• Front/ceiling
• Rear/ceiling
Positioning the projector
The projector should be installed perpendicular with the screen on a distance PD and water leveled in both directions. The mounting
positions in the following images are shown for a nominal lens position.
(1)
(2)
(3)
Image 2-2
Front-table configuration
(1) Side view
(2) Top view
(3) Back view
(4) Optical axis projection lens
(5) Floor
CD distance between projector and floor
PD Projector distance, distance between screen and projector
SW Screen width (image width)
SH Screen height (image height)
R59770014 XLM HD30 07/07/2006
(4)
PD
A
CD
(5)
CD = SH/2 + B - A
SH
B
SW
(5)
2. Installation Guidelines
SH
SW
11