Using The Rugged Remote Control; Projector Address - Barco R9004460 Owner's Manual

4. Getting Started
The remote control unit will not function properly if strong light strikes the sensor window or if there are
obstacles between the remote control and the IR sensor.
Directly to one of the IR sensors
1. When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft in a straight line)
(image 4-4)
The remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the
remote control unit and the projector IR sensor.
45° 45°
Image 4-4
Remote control to IR sensors
Hardwired remote control
The RCU can be connected via a cable with the projector. For more explanation, see "Hardwired remote to CTRL 1", page 32.
4.8

Using the Rugged remote control

Overview
The rugged remote control can be connected to the projector. For more explanation about the setup, see "Bi-directional communi-
cation port, CTRL 3", page 33.
Once set up, the rugged remote control can be used in the same way as the RCU. As this remote control has a limited number of
buttons, some functions are hidden in a the menu structure (e.g. picture controls)
4.9

Projector address

Overview
• Address setting
• Displaying and Programming addresses into the RCU
• Displaying and Programming addresses into the rugged remote control
42 R59770014 XLM HD30 07/07/2006