7. Installation
7.4.2
Lens files
What is possible ?
Lens settings can be stored in files. These settings can be recalled and will be loaded. This recall can be added as item in a macro.
7.4.2.1
Run a lens file
How to run a lens file ?
1. Push the cursor key ↑ or ↓ to highlight Run. (menu 7-12)
The Run lens menu will be displayed. (menu 7-13)
2. Push the cursor key ↑ or ↓ to highlight the desired file.
3. Press ENTER to select.
The selected file will be loaded.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
- Lens files -
RUN
SAVE
RENAME
COPY
DELETE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-12
7.4.2.2
Save lens settings
What can be done ?
A typical lens setting (zoom/focus and shift) can be stored in a file for future recalls.
How to save ?
1. Push the cursor key ↑ or ↓ to highlight Save. (menu 7-14)
2. Press ENTER to start the save action.
The save menu will be displayed. (menu 7-15)
3. Push the cursor key ↑ or ↓ to highlight <new name>.
4. Press ENTER to select.
The first digit will be highlighted.
5. Use the ↑ or ↓ key to change the digit. Use the ← or → key to go the next digit.
6. Press ENTER to accept the new name.
The lens settings will be saved with the new name.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
- Lens files -
RUN
SAVE
RENAME
COPY
DELETE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-14
90
RUN LENS
Lens-settings name
Attr.
File 1
rw-
File 2
rw-
Select with ↑ or ↓
<ENTER> to select
<EXIT> to return
Menu 7-13
SAVE LENS
Lens-settings name
Attr.
File 1
rw-
File 2
rw-
<new name>
Select with ↑ or ↓
<ENTER> to select
<EXIT> to return
Menu 7-15
R59770014 XLM HD30 07/07/2006