Edit A Macro - Barco R9004460 Owner's Manual

The Run macro menu will be displayed. (menu 7-34)
5. Push the cursor key ↑ or ↓ to highlight the desired macro file.
6. Press ENTER to select.
The selected macro file will be executed.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
BUTTONS
MACROS
OSD
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-32
7.8.2

Edit a Macro

What can be done ?
A macro file with read-write attributes can be edited. New lines can be added or existing lines can be changed or deleted.
How to edit a macro?
1. Push the cursor key ↑ or ↓ to highlight Macros. (menu 7-35)
2. Press ENTER to select.
The Macro menu will be displayed. (menu 7-36)
3. Push the cursor key ↑ or ↓ to highlight Edit.
4. Press ENTER to select.
The Edit macro menu opens. (menu 7-37)
5. Push the cursor key ↑ or ↓ to highlight the desired macro file.
Only macro files with read write attributes can be changed.
It is possible to select a macro file with only read attributes. When ENTER is pressed, the content of the macro file will be
displayed. When trying to change this file, an error message will be displayed.
6. Press ENTER to select the selected macro file.
The macro content overview menu opens. (menu 7-38)
7. Push the cursor key ↑ or ↓ to highlight an existing macro function or a free line.
When a existing macro function is selected, this function will be overwritten by the new selected function.
8. Press ENTER to change the content of the macro.
The Macro function menu opens. (menu 7-39)
9. Push the cursor key ↑ or ↓ to highlight the desired macro function.
Note: Only 2 macro functions are available.
When in the Edit macro menu an existing macro step is, and in the macro function menu, the dash is selected the selected macro
function will be erased.
10.Press ENTER to select.
The typical Macro value menu opens (the macro value menu differs for layout and lens). (menu 7-40)
11. Push the cursor key ↑ or ↓ to highlight the desired macro value.
12.Press ENTER to select.
R59770014 XLM HD30 07/07/2006
MACROS
RUN
EDIT
RENAME
COPY
DELETE
CREATE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-33
RUN MACRO
Macro name Attr.
Input 1 r--
Input 2 r--
Input 3 r--
Input 4 r--
Input 1234 r--
Select with ↑ or ↓
<ENTER> to select
<EXIT> to return
Menu 7-34
7. Installation
95