Unpacking Instructions - Emerson VININGS CF240ATB00 Owner's Manual

Antique bronze with dark cherry/walnut blades

Hide thumbs

Table Of Contents

Table of Contents

BP7359 VININGS CF240

9/19/07

This Manual Is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One Phillips head screwdriver

One wire stripper

One pair of pliers

One stepladder

Seven wire connectors (supplied)

Three 40-watt (maximum) Candelabra

bulbs

Materials

Wiring, outlet box and box connectors

must be of type required by the local code.

The minimum wire would be a 3-conductor

(2-wire with ground) of the following sizes:

For your convenience, check-off boxes are provided next to each step. As each

step is completed, place a check mark in the box. This will insure that all steps

have been completed and will be helpful in finding your place should you be

interrupted.

WARNING

Do not install or use fan if any part is

damaged or missing. Call Toll-Free:

1-800-654-3545

WARNING

This product is designed to use only

those parts supplied with this product

and/or

any

accessories

specifically for use with this product by

Emerson Electric Co. Substitution of

parts or accessories not designated for

use with this product by Emerson Electric

Co. could result in personal injury or

property damage.

1. Open styrofoam unit containing fan.

Remove top half of styrofoam unit.

Remove parts and check to see that

you have received the following parts:

11:13 AM

Page 3

Installed Wire Length

Up to 50 ft.

50-100 ft.

Before assembling your ceiling fan, refer

to section on proper method of wiring

your fan (page 11). If you feel you do not

have

enough

experience, have your fan installed by a

licensed electrician.