Unpacking Instructions - Emerson GEODE CF370PN00 Owner's Manual

WARNING
!
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
WARNING
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product.
Substitution of parts or accessories not designated
for use with this product by Emerson could result in
personal injury or property damage.
1.1
Open Carton containing the Fan. Remove top half of
styrofoam unit. Remove Parts and check to see that
you have received the following Hardware and Parts:
NOTE: If you are uncertain of part description, refer
to exploded view illustration.
NOTE: Place the parts from the loose parts bags in
a small container to keep them from being lost. If
any parts are missing, contact your local retailer or
catalog outlet for replacement before proceeding.
HARDWARE CONTENTS
Part Description
1 Wire Connectors, 12 ga.
2 Clevis Pin
3 Hairpin Clip
4 Threaded Stud, #8-32 x 1-1/4"
5 Lockwashers, External Tooth #8
6 Knurled Knobs, #8-32
7 #6-32 x 1/4" Truss Head Screws with
Lock Washers
8 #6-32 x 3/8" Truss Head Screw with
Lock Washer (spare)
9 #10-24 x 11 mm Washer Head Blade Screws
10 Blade Balance Kit
1
2
3
4

1. Unpacking Instructions

Quantity
5
1
1
2
2
2
4
1
10
1
8
7
9
10
5
6
PACKAGE CONTENTS
Part Description
A Fan Motor Assembly
B Ceiling Cover
C Coupler Cover
D Lower Housing
E LED Light Fixture Assembly
F Shade
G Hanger Bracket
H Hanger Ball / 4.5" Downrod Assembly
I Receiver with Hardware
J 4 Speed Wall Control Transmitter
with Hardware
K Fan Blades
1.2
Remove the Fan Motor Assembly from the protective
plastic bag. Place the Fan Motor Assembly onto the
upper foam pad with the bottom of the Fan Motor
Assembly facing up.
The upper foam pad serves as a holder for the Fan
during the first stages of assembly.
Please contact 1-800-654-3545 for further assistance
3
Quantity
1
1
1
1
1
1
1
1
1
1
3
emersonfans.com
ETL Model No.: CF370