Table of Contents
Advertisement
BP7359 VININGS CF240
9/19/07
WARNING
!
Hanger bracket must seat firmly
against outlet box. If the outlet box is
recessed, remove wall board until
bracket contacts box. If bracket
and/or outlet box are not securely
attached, the fan could wobble or
fall.
OUTLET
BOX
TWO SCREWS
SUPPLIED
WITH
OUTLET BOX
Figure 12
2. Carefully lift the fan and seat the hanger
ball/downrod assembly on the hanger
bracket that was just attached to the
outlet box (Figure 13). Be sure the
groove in the ball is lined up with the tab
on the hanger bracket (Figure 12).
11:13 AM
Page 10
!
Failure to seat tab in groove could
cause damage to electrical wires and
possible shock or fire hazard.
NOTE: CEILING COVER, SUPPL Y WIRES AND FAN
WIRES OMITTED FOR CLARITY.
HANGER
BRACKET
TAB
Figure 13
!
To avoid possible fire or shock, do
not pinch wires between the hanger
ball/downrod assembly and hanger
bracket.
10
WARNING
OUTLET
BOX
HANGER
BRACKET
HANGER BALL/
DOWNROD
ASSEMBLY
WARNING
U.L. Model No.: CF240
Advertisement
Table of Contents
