How Setup Levels Are Configured And Operating The Keys On The Front Panel - Omron E5CN User Manual

How Setup Levels Are Configured and Operating the Keys on the Front Panel

1-3 How Setup Levels Are Configured and Operating the Keys
on the Front Panel
Parameters are divided into groups, each called a "level". Each of the set val-
ues (setup items) in these levels are called a "parameter." The parameters on
the E5CN are divided into the following seven levels:
Power ON
Operation level
Less than
1 second
key
1 second min.
Initial setting level
key
1 second min.
Advanced
function setting level
Calibration level
Protect level
Operation level
Adjustment level
Initial setting level
Advanced function setting level
Calibration level
Communications setting level
: Indicates items that can be set.
Of these levels, the initial setting level, communications setting level,
advanced function setting level and calibration level can be used only when
control has stopped. Note that controller outputs are stopped when any of
these four levels are selected.
Adjustment level
key
key 3 seconds min.
key
25
100
The PV display flashes after one second.
Control stops.
Commu-
nications
setting level
key
Less than
1 second
Password input
set value "-169"
Note :
Communications setting level is displayed
when the optional communication unit
E53-CNH03 is mounted.
Password input
set value "1201"
Control in
Progress
-
-
-
-
Section 1-3
+
+ key
The PV display
flashes
1 second min.
25
100
+
3 seconds min.
Protect level
Control in progress
Control stopped
Control Stopped
-
-
-
key
key
5