1.3
How Setup Levels Are Configured and Operating
the Keys on the Front Panel
Parameters are divided into groups, each called a level". Each of the set
values (setup items) in these levels are called a parameter." The parame
ters on the E5EN are divided into the following seven levels:
*
* : To activate the advanced function setting level, set the Protect level"
of the Initial/Communications protect" to 0".
f
: Indicates items that can be set.
Of these levels, the initial setting level, communications setting level,
advanced function setting level and calibration level can be used only
when control has stopped. Note that controller outputs are stopped when
any of these four levels are selected.
Control in
Control Stopped
Progress
f
f
f
f
f
f
f