How Setup Levels Are Configured And Operating; The Keys On The Front Panel - Omron E5GN User Manual

CHAPTER 1 INTRODUCTION

1.3 How Setup Levels Are Configured and Operating

the Keys on the Front Panel

1–6
Parameters are divided into groups, each called a level". Each of the set
values (setup items) in these levels is called a parameter." The parame
ters on the E5GN are divided into the following seven levels:
When the E5GN is turned ON, all items in the display light for about one
second.
Power ON
Operation level
key
Less than
1 second
key
1 second min.
Initial setting level
Less than
1 second
Password input
key
1 second min. set value "-169"
Advanced
function setting level
Password input
set value "1201"
Calibration level
Protect level
Operation level
Adjustment level
Initial setting level
Advanced function setting level
Calibration level
Communications setting level
f : Indicates items that can be set.
Of these levels, the initial setting level, communications setting level,
advanced function setting level and calibration level can be used only
when control has stopped. Note that the controller outputs are stopped
when these four levels are selected.
Adjustment level
+
1 second min.
key 3 seconds min.
key The PV flashes after one second.
Control stops.
Commu-
nications
setting level
key
Note :
Communications setting level is displayed
only when E5GN-V03V with communica-
tions function is used.
Control in
Progress
f
f
f
-
-
-
-
key + key
The PV display
flashes .
+ key
3 seconds min.
Protect level
Control in progress
Control stopped
Control Stopped
-
-
-
f
f
f
f