Operation; Changing Channels; Info Banner; Selection Of Audio Language - Strong SRT 8201 User Manual

6.0 oPERATIon

Your new receiver is equipped with several features to make watching TV a true pleasure. This
paragraph describes these features. Please also read chapter 7.0 to get familiar with the menu of your
receiver.

6.1 Changing channels

Following ways are possible for changing channels with your new receiver:
Via direct access using the 0~9 buttons.
Via the channel list through ok and the Pg+/Pg- buttons.
Via the pq buttons.
6.1.1 direct access via 0~9 buttons
To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the
remote control. Channel numbers can be up to four digits long. Entering a number with less than
four digits is possible. Just wait a few seconds and your receiver will switch to the selected channel or
press ok immediately after selecting the channel number.
6.1.2 Channel list
Press ok in viewing mode to display the Channel List. Use pq in the channel list to highlight your
channel of choice and press ok once to select the highlighted channel. Press ok again to leave the
channel list mode. Inside the channel list it is possible to use the Pg+/Pg- buttons as well in order to
scroll page-wise through the list.
TIP:
6.1.3 using the
pq
p switches to the next channel.
q switches to the previous channel.

6.2 Info banner

While watching TV you can press the Info button at any time to access current information about
the channel and event*. Press Info twice for extended EPG details about the current channel. Press
Info three times for technical details about the current channel.
*Event information is displayed when available. Availability depends on broadcast.

6.3 Selection of audio language

Some channels support a choice of audio formats and/or languages. To select another audio stream,
press AudIo in viewing mode. A list with available audio streams will now be displayed. Use pq to
select the desired stream and confirm with ok. The audio channel as stereo, mono, left and right can
be selected with the tu buttons.
8
Use tu to toggle between the All Channel list and favourite list(s) or press
fAv in viewing mode for a list of available favourite lists.
buttons
PART 1 • English