Media - Strong SRT 8201 User Manual

Input the correct PIN code using the 0~9 (dEfAulT PIn: 1234). A confirmation window is displayed.
Select Yes to return to factory settings. Select No to cancel.
Press EXIT to leave.
7.4.3 S/W upgrade by oTA
This receiver is equipped with an Over The Air software upgrade function. An Over The Air update
might not be available in your region. Please visit our website www . strong . tv or contact your local
service hotline for more information about this option.
7.4.4 upgrade by uSb
This feature allows you to upgrade receiver software via the USB port. When new software is available
for your receiver, it can be downloaded from our website www . strong . tv.
Place the software file (unzipped) in the root directory of your USB storage device (HDD, memory
stick etc.) and connect the device to the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press ok to proceed.
The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose option Allcode.
Use pq to select Upgrade File and choose the file containing the latest and correct software.
Once all settings are made, move the highlight to Start and press ok to start the upgrade process.
After a few seconds, the receiver asks: "Are you sure to burn flash?". Select Yes to finalize the upgrade
or No to quit without upgrading.
noTE:
Warning:

7.5 media

The Media menu consists of the following submenus: Media Player, HDD Information, DVR Setting and
Remove USB device safely.
Use pq to highlight the menu of choice and press ok to enter. Press EXIT to quit.
7.5.1 media Player
This function allows playback of different kind of files from the connected USB storage device. In the
Media menu, select Media Player and press ok to enter this menu.
When entering the media player, the highlight is on the USB storage device. Press q and ok to open
the directory respectively its folders/subfolders.
First select which files you like to play back. Use the button 1 to switch between Video/Record/
Music or Image. Press pq to select a file or folder and then press ok to open the folder/subfolder (if
applicable) or start playback of the file. Press the EXIT button to exit.
16
If, after a software upgrade, the receiver should behave in an unexpected
way, please perform a factory reset as well. See chapter 7.4.2.
After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty!
PART 1 • English