System Setup - Strong SRT 8201 User Manual

PART 1 • English
Select Off for passive antennas.
When set to On, 5 V will be present on the ANT IN connector of the receiver.
Press EXIT to leave the Antenna Power menu.
7.2.4 lCn (logical Channel numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator defined order. Set LCN to On to activate operator defined
channel numbering or Off to store channels in found order. This function only applies when a new
channel search is performed.

7.3 System Setup

This menu allows you to manage the system settings of your receiver. It consists of the following
sub-menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting and Auto
Standby.
Press pq to highlight the menu of choice and press ok advance to the next screen. Use pq to
move the highlight to the setting of choice. Values can be changed with tu. Press EXIT to leave.
7.3.1 language
This menu allows you to set up your language preferences.
Language:
First Audio:
Second Audio:
Subtitle Language:
Second Subtitle Language:
Teletext:
Subtitle:
* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported,
then most likely subtitles can be activated via Teletext if available.
7.3.2 Tv System
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution:
Aspect Mode:
Use tu to select the language for the On Screen Display.
Use tu to select Audio language.
Use tu to select a language that will be played when the language selected
at First Audio isn't available.
Use tu to select the preferred subtitle language.
Use tu to select the preferred subtitle language.
Use tu to select the preferred Teletext language (when available).
Use tu to select the preferred subtitle type to be displayed automatically.
Select Normal, Hard of Hearing or Off*
Use this option to select the video resolution of your TV screen. Options are:
By Source (automatic detection of video resolution offered to the receiver),
By Native TV (automatic detection of maximal resolution of TV screen), and
manual selections 480i, 576i up to 1080p Please use a setting that matches
your TV's specifications. After a selection is made, you will be asked to
confirm. Selection above 576i is only applicable on HDMI output.
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto (automatic detection of aspect
ratio), 4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your
4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and
16:9 (use this setting for 16:9 TV sets).
13