Teletext; Subtitles; Timeshift; Epg (Electronic Programme Guide) - Strong SRT 8201 User Manual

PART 1 • English

6.4 Teletext

Your receiver includes a fully featured Teletext. To access Teletext, press the TTX button in viewing
mode and use the 0~9 buttons to input the number of the page you wish to see. The coloured
buttons of the remote control allow you to jump to selected pages directly, as indicated on the
bottom of the Teletext screen. Use the pq buttons to select one page up or down, use tu buttons
to select subpages. Press EXIT or TTX to get back to viewing mode.

6.5 Subtitles

Some channels support a choice of subtitle languages. Press SubTITlE in viewing mode to display a
list of available subtitle languages. Select your subtitle of choice with pq and press ok to confirm.
Press EXIT to leave without making changes.*
* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported,
then most likely subtitles can be activated via Teletext if available.

6.6 Timeshift

Timeshift allows you to pause live broadcasts and resume playback later. To activate this function, set
the Timeshift mode in the DVR Setting menu to on by selecting Pause. For details, see 7.6.3. Press 2
in viewing mode to activate Timeshift. The progress information banner appears on screen. Live TV
keeps playing for moment and will then pause. Press u to resume Timeshifted playback. Press 3 to
return to live TV.
noTE:

6.7 EPg (Electronic Programme guide)

The Electronic Programme Guide is a very useful function that allows you to view event schedules
and programme information and to mark events/movies for recording. To access the EPG, press the
EPg button in viewing mode. Use pq to select a channel and tu to select an event. Press ok to
display detailed information of the selected event. Use EXIT to quit the detailed information screen.
Press REd to access further step functions. Use tu to select the desired step and ok to execute it.
Press EXIT to quit the step function. Press gREEn to set a timer for a selected event. Refer to section
7.3.4 for details of the timer function.
noTE:

6.8 Instant Recording

Your new receiver allows you to make an instant recording of the programme you are watching.
Simply press RECoRd to start the recording. To enter the duration for the recording, press RECoRd
again. Use the 0~9 buttons to enter the recording time and press ok to confirm.
Timeshift and its playback only work properly when a fast USB storage
device such as a USB2.0 HDD is connected to the receiver. Timeshift and
playback of HD content requires sufficient read/write speed of the used
USB storage device.
Availability of EPG data depends on broadcast.
9