Connection; Connecting To A Terrestrial Antenna; Connecting To Tv With Hdmi Cable; Connecting To Tv With Scart Cable - Strong SRT 8201 User Manual

PART 1 • English
11. ok
12. RECoRd
13. TImEShIfT
14. 0~9
15. EPg
16. RECAll
17. AudIo
18. Tv/RAdIo
19. fAv
20. fIlE
21. TTX
22. SubTITlE
23. 5 6
24. Coloured buttons For Multimedia and Teletext functions

3.0 ConnECTIon

3.1 Connecting to a Terrestrial Antenna

To receive broadcasted signals, your terrestrial indoor or outdoor antenna must be connected to the
ANT IN connector on the back of the receiver. Use a properly shielded antenna cable and suitable
connectors.
The ANT OUT connector allows you to loop the antenna signal to a second receiver or TV set.
Please consider that the looped signal might be too weak if you use an active antenna.
noTE:

3.2 Connecting to Tv with hdmI cable

The TV set shall be connected with the receiver using a good quality HDMI 1.3 or higher cable. This
connection gives the highest possible quality.

3.3 Connecting to Tv with SCART cable

Your receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to
the receiver using a good quality SCART cable.
Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
Records the TV programme to the connected USB storage device
Activates the Timeshift function (Off/On)
Enters a channel number in viewing mode or a value inside the
respective menu
Opens the EPG (Electronic Programme Guide) in TV mode
Back to previously watched channel
Opens the audio language selection
Toggles between TV or RADIO mode
Opens the favourite group selection
Opens the Media Player list
Displays Teletext on the OSD (On Screen Display)
Shows a list of subtitle languages
Fast rewind/fast forward
If the signals at your location are too weak to receive proper signals with
an indoor antenna, we recommend using an outdoor antenna which can
be pointed towards the transmission tower. Ask your local dealer for more
information.
Fig. 4
Fig. 4
Fig. 4
5