Remove Usb Device Safely - Strong SRT 8201 User Manual

PART 1 • English
7.5.3 dvR Setting
This menu allows you to configure settings for Timeshift, recording and playback.
Select DVR Setting in the Media menu and press ok to enter.
Use pq to move the highlight and tu to change settings.
Timeshift:
Step to:
Time Shift to Record:
PS Record:
Press EXIT to leave this menu.

7.5.4 Remove uSb device safely

Select Remove USB device safely from the tools menu and press ok. The receiver will display a
message indicating that you can safely remove your storage device from the receiver.
noTE:
Select between Auto, Pause or Off. When Timeshift is set to Auto it will
automatically start every time after tuning to a channel. When Timeshift is set
to Pause it will start only after pressing the YElloW/2 button. Select Off to
deactivate Timeshift.
30 sec to 30 min. Set the time step you like to jump forward by pressing 4
during playback of recorded files. This will only work when the info banner is
displayed on screen. If it is not, press Info.
If set to On the timeshifted part will be included in your recording when you
start to record the current programme.
Select between On or Off. When Off is selected, recordings will also include
subtitles and Teletext (when available). Record to PS mode On allows
recordings without these extras which will need less space on your USB
device.
After performing this function, the USB device is no longer accessible from
your receiver. To gain access to your storage device again, re-insert it or
switch the receiver to standby and on again.
19