1B 6Kp4-F10St, Module; 1C 6Kp4-Flstfx, Module - GarrettCom Magnum 6K25 Hardware Installation And User's Manual

Magnum 6K25 Managed Fiber Switch
5.2.1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST "twist lock" Module
The Magnum 6KP4-F10ST
is a 10Mb multi-mode
fiber module with 4 ST-
Fiber ports. All four fiber
ports are ST connectors
and configured as 10Mb
Half-duplex by default.
The 10Mb ST-fiber ports
allow the user to connect
their legacy 10Mb network
to the Magnum 6K25
switch. They also provide a convenient way for the half duplex
hub to connect to the switch through 10Mb fiber ports. It supports distances according to
the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-mode for 10Km
distance may be available as a special order).
received, a Link (LK) LED indicating proper connectivity with the remote device when
lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.1c 6KP4-FLSTFX, 2@10Mb & 2@100Mb multi-mode FX-ST "twist
lock" Module
The Magnum 6KP4-
FLSTFX is a combo fiber
module with two 10Mb +
two 100Mb multi-mode
fiber module and in
combine 4 ST-Fiber ports.
All four fiber ports are ST
connectors and configured
as 10Mb Half-duplex by
default for 10Mb fiber and
100Mb Full duplex for the
100Mb fiber. The 10Mb ST-fiber ports allow the user to connect their legacy 10Mb
network to the Magnum 6K25 switch. They also provide a convenient way for the half
www GarrettCom com . .
3
Each port has an Activity (ACT) LED indicating packets being
3
Installation and User Guide (04/06)
6KP4-RJ10MST,
4 Port@ 10Mb ST Fiber Port
2
ACT ACT
F/H F/H
TX LK RX
1
ACT
ACT
F/H
F/H
2 TX LK RX
1
LINK
3
FULL/HALF
6KP4-RJ10MST,
4 Port@ 10Mb ST Fiber Port
2
ACT ACT
F/H F/H
TX LK RX
1
ACT
ACT
F/H
F/H
2 TX LK RX
1
LINK
3
FULL/HALF
43
TX LK RX
5
6 T LK RX
2 ACTIVITY
TX LK RX
5
6 T LK RX
2 ACTIVITY
1
1