Table of Contents
Advertisement
Magnum 6K25 Managed Fiber Switch
5.0
Introduction - Magnum 6K25 Managed Fiber Switch Port
Modules
This chapter describes each Port Module (PM), including appearance,
functionality, and status displays.
5.1
Inspecting the Package and Product
This section applies only to PMs shipped as separate items, i.e., 6K25 PMs not
factory installed in a Magnum 6K25 PM slot.
installing a 6K25 PM; notify the carrier of any damage you believe occurred
during shipment or delivery. Inspect the contents of this package for any signs
of damage and ensure that the items listed below are included.
This package should contain:
keep the shipping container should you need to ship any of the PMs separately
at a later date. In the event there are items missing or damaged, contact your
supplier. If you need to return the unit, use the original shipping container if
possible. Refer to Chapter 5 for specific return procedures.
5.2
6KPM Module Description
Modules for flexible mixed-media connectivity to RJ-45 and fiber media. Since
the Magnum 6K25 Switches have dual-speed capability for copper ports, the 6
or 8-port interfaces are designed to support all standard Ethernet media types at
10 or 100Mps speed. Each 6K25 PM provides six or eight ports for connecting
Ethernet segments with its individual connector type and media.
www GarrettCom com
.
.
Examine the shipping container for obvious damage prior to
1 or more 6K25 PMs
Installation instructions, with illustrations
Remove the 6K25 PM(s) from the shipping container. Be sure to
An important feature of the Magnum 6K25 is the use of Port
For a list of 6K25 Port Module types, refer to Section 1.2
Each 6K25 PM is individually described in the following sections.
NOTE: The port #1 on the RJ-45 ports on all the modules, either all
RJ-45 ports or used for COMBO module is set as (=) other user ports.
Installation and User Guide (04/06)
41
Hide quick links:
Advertisement
Table of Contents
