Configuring Circuit And Dlci Records - Paradyne FrameSaver
DSL 9783 User Manual

Configuring Circuit and DLCI Records

9783-A2-GB20-00
Circuit and DLCI records can be created and modified, and PVCs created based
on existing DLCIs, using the Network Circuit Records screen and the Data Ports
DLCI Records screen:
Main Menu Configuration
Main Menu Configuration
Table 4-9. DLCI Record Options (1 of 3)
DLCI Number
Possible Settings: 16 – 1007
Default Setting: Initially blank; no default.
Specifies the number for the DLCI in the DLCI record. The parameter determines which
DLCI record is used for transferring data on a particular frame relay interface. DLCI
numbers range from 0 to 1023. However, the numbers 0 to15 and 1008 to 1023 are
reserved. Entry of an invalid number results in the error message Value Out of
Range (16 – 1007). If the DLCI number is part of a connection, this field is read-only.
NOTES: – If a DLCI number is not entered, the DLCI record is not created.
– The DLCI number entered must be unique for the interface.
– Changing settings for this configuration option causes the FrameSaver
unit to abort any active frame relay tests.
16 – 1007 – Specifies the DLCI number (inclusive).
VPI,VCI Number (VPI)
Possible Settings: 0 – 15
Default Setting: Initially blank; no default.
Specifies the VPI. Entry of an invalid number results in the error message Value Out
of Range (0 – 15). The VPI/VCI must be unique on the ATM link.
Display Conditions – This option does not appear for the user data port.
0 – 15 – Specifies the VPI.
VPI,VCI Number (VCI)
Possible Settings: 32 – 255
Default Setting: Initially blank; no default.
Specifies the VCI. Entry of an invalid number results in the error message Value Out
of Range (32 – 255). The VPI/VCI must be unique on the ATM link.
Display Conditions – This option does not appear for the user data port.
32 – 255 – Specifies the VCI.
Network Circuit Records
Data Port DLCI Records
July 2000
Configuration Options
4-19